Download Print this page

PRx Performance Profile PRO Squat Rack with Pull-Up Bar 96” Assembly Instructions Manual page 9

Hide thumbs Also See for Profile PRO Squat Rack with Pull-Up Bar 96”:

Attach Gas Shocks to Wallbrackets

1. *ATTENTION: TEAM LIFT the rack by holding each upright and pushing up against the wall. NOTE:

T h e rack will be heavy

2. Attach Gas Shocks to 'ear' of the wall bracket with the 5/16" Serr Flange Nut (#8 already attached to the

shock)and tighten using a two 1/2" open-ended wrench

3. Repeat for all shocks

4. Move the rack from the up position to the down position. It should move with ease. If it feels 'stiff ', loosen

the pivot point slightly until it moves more smoothly

Please send a video or photo of your rack in action to

Questions? Email us at sales@prxperformance.com

sales@prxperformance.com when complete.

We would love to see it!

That's it!

Need help?

Do you have a question about the Profile PRO Squat Rack with Pull-Up Bar 96” and is the answer not in the manual?

Profile squat rack with pull-up bar 90”