Machine Gives En Error Message - Labotek Desiccant Flex Dryer Manual

Rev. 01

6.1 Machine gives en error message

Alarms
The machine continually monitors the system to ensure correct functionality. An alarm will show if
the machine is not operating properly, the alarm will be shown with a blinking icon on the operating
screen. Below please find list of potential alarms.
Alarm-nr. Betegnelse
00 Fire safety failure
01 Motor-dryer failure
02 Motor regeneration failure
03 Phase relay out
04 Directional valve position
05 Regeneration valve position
06 Filter alarm
11 Process air temperature
12 Process air temperature - cooler Shuts down process air + cooler
13 Return air temperature - cooler
14 Regeneration taking too long
15 Sensor process air
16 Sensor process air - cooler
17 Sensor return air - cooler
18 Sensor regenerating
Desiccant Flex Dryer DFD
Aktion.
Shuts down the machine
Shuts down process air + cooler
Stop regeneration
Shuts down the machine
Shuts down the machine
Message only
Message only
Shuts down process air + cooler
Message only
Message only
Shuts down process air + cooler
Shuts down process air + cooler
Message only
Shuts down drying/regeneration
Side 30 af 40