Belt & Deck System; Belt/Deck Detail - Star Trac 8-TRx Service Manual

Belt/Deck Detail

Belt & Deck System
The belt and deck system is the main function of the treadmill. The drive belt connects the drive
motor to the head roller. The tail roller is used for tensioning and tracking of the running belt. The
running belt goes around the two rollers and the deck. The deck is the hard surface that the running
belt slides on. The user runs on the belt and deck which are wear items.
You must install a new running belt and new deck surface together. Most Startrac decks are double-
sided so they can be flipped to utilize both sides. Failure to install a new running belt over a fresh
deck surface will cause the running belt to burn along the center walking area, the edges will curl,
electrical components will create so much heat as to begin to fail, and damage will not be covered
under warranty. If replacing a deck due to wear, it is advisable to replace the running belt as well,
because wear is commonly caused in conjunction with the running belt.
During a non-belt and/or deck related service, if a running belt and/or deck are removed, it may
be acceptable to re-install the belt and deck as long as no visible signs of wear are present or the
situation does not require replacement.
If you have questions on whether or not to replace a running belt and/or deck, contact Customer
Support. Components of the belt & deck system include the following parts:
Page 16