Star Trac 8-TRx Service Manual page 33

Item Description
This is the calibration program that is run to calibrate the drive motor for steady transi-
Motor Calibration
tions between speeds.
This is the calibration program that is run to calibrate the minimum and maximum cali-
Elevation Calibration
bration values.
Burn In Mode Manufacture test only.
CCB When a PVS CCB is properly connected, the version of software in the CCB will be display.
USB When a PVS CCB is properly connected, the version of software for the USB is displayed.
Manager Mode (E-TR & E-TRx Only)
From the idle screen (unit is powered on but not in a program),
The word "MANAGER" will temporarily show in the marquee window and then go to the
together.
first setting. The Manager Mode has only limited settings to change where the Maintenance Mode
contains all available settings.
press and hold the , and keys
Page 33