Numatic CleanTec Hi&Lo NHL 15 Owner's Instructions Manual page 32

The NHL 15 comes with a complete set of high quality stainless steel wands.
To make the machine comfortable to use we have included a small spacer wand allowing the height of the wand set to be adjustable
for different height operatives.
Fig 27
The solution tube has been designed so the trigger can be fitted either way on to the stainless curved wand. (fig 27)
Connect the solution tube from the hose on to the operating trigger (Fig 28).
Connect the solution tube end into the quick release connector fitted onto the floor-tool (Fig 29)
Clip the solution tube to the wand by using the clips supplied in the kit.
Adjust the working height by using the short wand spacer to allow comfortable use.
900mm
Fig 25
Connecting the solution tube
Assemble the wands, as shown.
Adjust the height using the small spacer wand to suit.
(Fig 25).
Simply slide the wands together (Fig 26).
1000mm
Ensure that the wands and floor tool are firmly located before
use.
Fig 28
233936 Page 32 04/12 (A02)
Fig 26
Fig 29