Cypress CapSense CY8CKIT-024 Manual page 5

Safety Information
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform procedures only at an ESD
workstation. If an ESD workstation is not available, use appropriate ESD protection by wearing an antistatic wrist strap
attached to the chassis ground (any unpainted metal surface) on the board when handling these parts.
Handling Boards
CY8CKIT-024 boards are sensitive to ESD. Hold the board only by its edges. Do not slide the board over any surface.
CY8CKIT-024 CapSense® Proximity Shield Kit Guide, Doc. No. 001-92568 Rev. *A 5