IBM 5531 Operator's Manual page 63

Problem Determination Procedures
Loading Diagnostics
(continued)
12. The installed devices menu appears. Does the screen correctly list all the installed devices
and options that you have in your system?
(If
your printer is not listed, answer Yes.)
Notes:
a. The screen below is only a representation of the screen you will have depending on the
configuration of your system. Refer to Appendix A to verify the options installed in the
system unit and compare with the options listed on your screen.
b. Cables will not appear in the list.
S means the device or option is installed in the system unit.
YES Press Y; then press the Enter key. Proceed with Step 13.
NO - Press N; then press the Enter key. Record the error message and have your system
unit serviced.
13. Press 0 (RUN TESTS ONE TIME); then press the Enter key.
5-18
Operator's Guide
You have loaded the diagnostic tests successfully. Continue with the tests on the
following pages to perform a complete system checkout.
Note: The tests are performed in sequence. Follow the steps and instructions that
appear on the screen and use this manual as reference where indicated.