IBM 5531 Operator's Manual page 108

Test 2200 - IBM Personal Computer Cluster Adapter
(continued)
7. Wait 15 seconds. Do all stations in the cluster appear and remain on the
screen presentation?
Note: This screen is for illustrative purposes only.
Notes:
a. Your installation manager has a cluster map that lists the station addresses and the order
in which the stations are connected. Compare the map and the status screen
presentation to determine that all stations in the cluster are operating properly.
b. The status screen shows all stations installed on your cluster, and is updated every 3
seconds to show stations that are added to or removed from the cluster.
YES - The system has successfully completed this test. Press any key and continue with
the next test.
NO - Proceed with Step 8.
Chapter 5. Problem Determination Procedures
5-2200-7