IBM 5531 Operator's Manual page 5

Preface
How This Book Is Organized
(continued)
Chapter 4. Checking and Replacing Filters. This chapter provides instructions on checking and
replacing the filters on the system unit and on an IBM Industrial Color Display.
Chapter 5. Problem Determination Procedures. This chapter provides steps for correcting
problems that may occur. The chapter shows how to check electrical and communications
connections, how to adjust screen alignment, and how to correct other problems that may occur.
Appendix A. Option List. The Option List is to be used for determining which options are
installed in your system.
How to Use This Book
iv
Operator's Guide
When using this book, disregard any reference to options or adapters that are not a part of your
system. The final configuration of your system depends on your choice of the various options
and adapters that are available.
This book is intended to cover options and adapters that mayor may not be installed in your
system.
Chapters 1, 2, and 3 are meant to be read in order.
Chapter 1 shows you the components of an IBM Industrial Computer system. Once you are
familiar with the system, Chapter 2 shows you how to connect the cables. Chapter 3 shows you
how to insert a diskette in the diskette drive.
Refer to Chapter 4 when you need to check or replace the filters on the system unit and the
display.
Refer to Chapter 5, "Problem Determination Procedures," to correct problems that occur during
system use.
Each of the five chapters has an external tab to help you find the chapter more easily.