Removing A Diskette From The Diskette Drive - IBM 5531 Operator's Manual

Inserting and Removing a Diskette from the Drive
(continued)
3. Insert the diskette in the diskette drive as shown.
Note: Make sure that the diskette label faces up and is in the position shown below.
4. Close the drive load lever.
5. Press the Alt, Ctrl, and Del keys together to load the program.
In a moment, the in-use light will blink. The light lets you know that the system is using the
diskette drive.
Warning: Do not open the drive load lever when the in-use light is on. Your diskette data
may be damaged if you do.
Removing a Diskette from the Diskette Drive
To remove a diskette from the diskette drive:
1. Open the drive cover door.
2. Make sure that the in-use light is off.
Warning: Do not open the drive load lever when the in-use light is on. Your diskette data
may be damaged if you do.
3. Open the drive load lever and remove the diskette.
Chapter 3. Diskettes and Utilities
3-5