Seagull Models L-4 Grasshopper 90 inches Assembly Manual page 6

L-4 Grasshopper 90 inches
Use drill bit in a pin vise to drill the
mouting holes in the blocks.
4.
Apply 2-3 drops of thin C/A to each
of the mounting holes. Allow the C/A to
cure without using accelerator.
5.
C/A glue
Use dental loss or heatshrunk tube to
secure the connection so they cannot be-
come unplugged.
6.
Secure the servo to the aileron hatch
using Phillips screwdriver and the screws
provided with the servo.
7.
6
Apply 1-2 drops of thin C/A to each
of the mounting tabs. Allow the C/A to
cure without using accelerator.
8.
1.5mm
Remove the string from the wing at the
servo location and use the tape to attach it
to the servo extension lead. Pull the lead
through the wing and remove the string.
9.
10.
Instruction Manual.
C/A glue