Download Print this page

Freescale Semiconductor TWR-KL46Z48M Quick Start Manual

For kinetis kl46/36/34/26/16 mcu families

Advertisement

Quick Links

Quick Start Guide
TWR-KL46Z48M
Development Kit for Kinetis
KL46/36/34/26/16 MCU Families
TOWER SYSTEM

Advertisement

loading
Need help?

Need help?

Do you have a question about the TWR-KL46Z48M and is the answer not in the manual?

Questions and answers

Summary of Contents for Freescale Semiconductor TWR-KL46Z48M

  • Page 1 Quick Start Guide TWR-KL46Z48M Development Kit for Kinetis KL46/36/34/26/16 MCU Families TOWER SYSTEM...
  • Page 2 Quick Start Guide Step-by-Step Installation Instructions In this quick start guide, you will learn how to set up the TWR-KL46Z48M module and run the included demonstrated software. For more detailed information, review the user manual at freescale.com/TWR-KL46Z48M. Segment LCD Download Software...
  • Page 3 USB Debug Connector 3.3/1.8 VDD Select Electrodes with Center LED Power On LED User Push User Push Button SW4 Button SW2 KL46 SWD GPIO Debugger Header Header KL46 USB Connector Figure 1: Front side of TWR-KL46Z48M module (TWRPI device not attached)
  • Page 4 Figure 2: Back side of TWR-KL46Z48M module TWR-KL46Z48M Freescale Tower System The TWR-KL46Z48M MCU module is designed to work either in standalone mode or as part of the Freescale Tower System, a modular development platform that enables rapid prototyping and tool re-use through reconfigurable hardware.
  • Page 5 TOWER SYSTEM TWR-KL46Z48M Features • Tower System-compatible MCU module • MKL46Z256VLL4 MCU (48 MHz, 256 KB flash, 32 KB RAM, low power, sLCD controller, 100 LQFP package • Segment LCD module (TWRPI-SLCD) • Dual role USB interface with Micro-AB USB connector •...
  • Page 6 Quick Start Guide TWR-KL46Z48M Jumper Options The following is a list of all the jumper options. The default installed jumper settings are indicated by white text within the red boxes or bold text in the “Signal” column. Jumper Position Signal...
  • Page 7 TOWER SYSTEM Jumper Position Signal KL46 Pin Name KL46_USB_FLGA PTE31/FTM0_CH4 KL46_USB_ENABLE PTB11/SPI1_SCK 1-8 ON LED Green PTA17 7-2 ON LED Red PTB8 LED Orange PTE26/TPM0_CH5 LED Yellow PTA16 6-3 OFF IR (Tx) PTE22 5-4 OFF IR (Rx) PTE23 Accelerometer SCL Enable PTC10 I2C1_SCL Accelerometer SDA Enable PTC11 I2C1_SDA...
  • Page 8: Get Started

    Freescale, the Freescale logo, CodeWarrrior, Kinetis and Processor Expert are trademarks of Freescale semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Tower is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM Limited.