Husqvarna PG 690 Operator's Manual page 12

Hide thumbs Also See for PG 690:
Table of Contents

Advertisement

Available languages

Available languages

Guide values for power source
Nominal
Min. voltage at
voltage
the product, V
from power
source, V
PG 690
200
3x220
PG 690
380
3x400/440/
480
PG 830
200
3x220
PG 830
380
3x400/440/
480
Grounded product instructions
WARNING: Incorrect connection can result
in electrical shock. Speak to an approved
electrician if you are not sure if the product
is correctly grounded.
Do not do modifications to the power plug
from its factory specification. If the power
plug is not correct for the mains outlet, let an
approved electrician install a correct mains
outlet. Obey local regulations and laws.
If you do not fully understand the
instructions about the grounded product,
speak to an approved electrician.
The product has a grounded power cord and power
plug. Always connect the product to a grounded mains
outlet. This decreases the risk of electrical shock if there
is a malfunction.
Do not use electrical adapters with the product.
Extension cables
Use only approved extension cables with sufficient
length.
The rated value on the extension cable must be the
same or higher than given on the rating plate of the
product.
Use grounded extension cables.
When you operate the product outdoors, use an
extension cable that is applicable for outdoor
operation. This decreases the risk of electrical
shock.
Keep the connection to the extension cable dry and
off the ground.
12
Max. voltage at
Frequency,
the product, V
Hz
240
50/60
480
50/60
240
50/60
480
50/60
Nominal
Motor out-
current, A
put
50
11+1.5
30
11+1.5
50
11+1.5
30
15+1.5
Keep the extension cable away from heat, oil, sharp
edges or moving parts. A damaged cable increases
the risk of electrical shock.
Make sure that the extension cable is in good
condition and not damaged.
Do not use the extension cable while it is wound up.
This can cause the extension cable to become too
hot.
Make sure that the extension cable is behind you
and the product when you use the product. This
prevents damage to the extension cable.
Battery safety
WARNING: Read the warning instructions
that follow before you use the product.
Only use the batteries that we recommend for your
product. The batteries are software encrypted.
Use only original batteries for this product. There is a
risk of explosion if the batteries are replaced with a
battery of incorrect type. Speak to your dealer for
more information.
Use batteries that are rechargable as a power supply
for the related Husqvarna products only. To prevent
injury, do not use the battery as a power supply for
other devices.
Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and get
medical aid.
Do not use batteries that are non-rechargable.
Do not do modifications to the battery.
Do not put objects into the air slots of the battery.
Min. cable
Max. cable
area
length m/ft
mm2/AWG
10/7
190/620
6/9
190/620
10/7
190/620
6/9
190/620
1163 - 003 - 22.01.2020

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pg 690 rcPg 830Pg 830 rc

Table of Contents