Husqvarna PG 690 Operator's Manual page 48

Weight in position 3 (rear-
ward), kg/Ibs
Weight in position 3 (rear-
ward) with support wheel,
kg/Ibs
Grinding disc speed, rpm
Grinding head speed, rpm
Direction of rotation
Max. gradient, degrees °
Enclosure, IP
Type of battery
Recommended dust extractor
Dust extractor attachment,
mm/in.
3
Min. Air flow, m /h /CFM
Min. Vacuum, kPa/psi
®
Bluetooth Low Energy technology radio spectrum
Frequency bands for the tool,
GHz
Maximum radio frequency
power transmitted, dBm/mW
Radio frequency data
Maximum radio frequency power transmitted, dBmi
Sound levels
5
Noise emissions
3
Technical data for dust extractors are not conclusively describing actual performance over time between dif-
ferent dust extractors. For Husqvarna products OSHA objective data are available at
www.husqvarnacp.com/us.
4
This part is applicable only for product supplied with embedded connectivity.
5
Noise emission in the environment measured as sound power according to EN 60335-2-72. Expected meas-
urement uncertainty 2,5 dB(A).
48
PG 830
3x220-240 V
245/540
282/622
421-1403
9-47
Independent direction of rotation CW/CCW for grinding discs and grinding head.
10
54
-
3
76/3
815/480
30/4.4
4
-
-
PG 690 PG 690 RC
PG 830 PG 830 RC
3x440-480 V 3x220-240 V
245/540
282/622
421-1403 421-1403
9-47
10
54
-
76/3
815/480
30/4.4
- 2.402-2.480
-
PG 690 RC
Less than 10
PG 830
PG 830 RC
3x440-480 V
259/571 259/571
296/653 296/653
421-1403
9-47 9-47
10
54
Li-ion Li-ion
75/3 76/3
815/480 815/480
30/4.4 30/4.4
2.402-2.480
4/2.5 4/2.5
PG 830 RC
Less than 10
PG 830 RC
1163 - 003 - 22.01.2020
10
54