Table of Contents
Advertisement
• Do not modify the motor's basic settings and do not over-rev it.
• Carefully start the motor in accordance with the instructions and ensure there is an adequate
distance from your feet to the tool(s).
• Never place your hands or feet on or under rotating parts.
• Always keep your hands and feet well away from the area of the cutting tool.
• Never lift or carry a product while the motor is running.
• The motor must be switched off:
– whenever you leave the product.
– before refuelling.
• The throttle valve must be closed when the motor runs on. If the product is fitted with a petrol
valve, this must be closed when work is complete.
Maintenance and storage
• Always make sure that all nuts, bolts and screws are firmly tightened. This will ensure that the
product is in a safe working condition.
• While petrol is in the tank, never store the product in a building in which petrol vapours may
come into contact with naked flames or sparks or can be easily ignited.
• Allow the motor to cool down before storing product in enclosed spaces.
• To avoid the risk of fire keep the motor and exhaust away from vegetable matter and leaking
grease (oil).
• For safety reasons always replace worn or damaged parts.
• Should the tank need draining, do this outdoors.
Personal protective equipment
Wear appropriate hearing protection while working with the product! Wearing
hearing protection reduces the risk of injury.
Wear safety shoes while you are working with the product! Wearing safety shoes
reduces the risk of injury.
Wear tight fitting clothing while working with the product. Loose fitting clothing can
get pulled in while working with the product.
Wear goggles while working with the product! Wearing goggles reduces the risk of
injury.
Wear safety gloves while working with the product! Wearing safety gloves reduces
the risk of injury.
Advertisement
Table of Contents
