Master Cut CJF-1001A Operating Instructions Manual page 21

Sickle-bar mower
Table of Contents

Advertisement

Fault/malfunction
Motor misfires
when running.
Motor does not
reach the maximum
speed.
Drive is not
working.
Mowing drive is not
working.
Strong vibrations
If you cannot eliminate the error yourself, please contact Dealer's Service directly. Please be
aware that any improper repairs will also invalidate the warranty and additional costs may be
incurred.
Usable fuels and lubricants
DANGER
Danger of fire!
Avoid damage caused by leaking fuel: Drain the tank before disposing of the
product.
CAUTION
Environmental damage!
Damage caused by leaking operating media: Remove operating media before
disposing of the product.
• Normal petrol, unleaded, recommend gasoline grade 90# over.
• Motor oil: SAE 15W-40 or 10W-30
• Gearbox oil: L-CKE-/P-320
Cause
Spark plug connector not
firmly attached?
Air filter contaminated?
Incorrect fuel?
Fuel contaminated?
Throttle at
?
Air filter contaminated?
Spark plug contaminated?
Distance from electrode to
spark plug too great?
Incorrect fuel?
Wrong tension of Bowden
cable for the drive?
Drive defective?
Wrong tension of Bowden
cable for the mowing drive?
Mowing drive defective?
Loose or damaged parts?
Remedy
Push the connector firmly onto the spark
plug.
Cleaning/replacing the air filter
Drain tank and fill up with the correct fuel.
Empty tank and fill up with fresh fuel.
Return throttle to direction
Cleaning/replacing the air filter
Clean the spark plug
Adjust gap to 0.7 mm to 0.8 mm.
Drain tank and fill up with the correct fuel
Have it checked by an expert.
Have it checked by an expert.
Have it checked by an expert.
Have it checked by an expert.
Check the product for loose or damaged
parts.
.

Advertisement

Table of Contents
loading

Table of Contents