Table of Contents
Advertisement
After each use
What?
Clean the product.
Lubricate the cutting tool.
After the first five operating hours
What?
Change the motor oil.
Every 25 operating hours or every 3 months
What?
Replace the air filter.
Remove grass and dirt from rotating parts.
Clean covers.
Every 100 operating hours or every 12 months
What?
Clean/replace the spark plug.
Change the gearbox/motor oil.
Cleaning the product
WARNING
Risk of injury!
Clean the cutting tool carefully. The cutting tool may still move even though the
product is switched off.
Careful handling and regular cleaning ensure that the product remains functional and efficient for
a long time.
Clean the product immediately after each use. Dried-on grass is extremely hard and difficult to
remove.
• Brush off coarse dirt.
• Wipe down the product with a slightly damp cloth.
• Never spray the product with water or expose it to water.
• Never use cleaning agents or solvents.
• Keep ventilation slots clean and free of dust.
How?
Cleaning the product
Lubricate
the
cutting tool
lubricating grease.
How?
Draining the motor oil.
How?
Cleaning/replacing the air filter
Using a brush or another suitable blunt object.
Wipe down with a slightly damp cloth.
How?
Cleaning/replacing the spark plug
Draining the motor oil
Changing the gearbox oil
with
a
little
Advertisement
Table of Contents
