Troubleshooting - Master Cut CJF-1001A Operating Instructions Manual

Sickle-bar mower
Table of Contents

Advertisement

CAUTION
Environmental damage, fire hazard!
Avoid damage caused by leaking fuel, motor oil or gearbox oil: Remove all
operating media before disposing of the product.
Do not dispose of the product with the household waste! Proper disposal is mandatory. Informa-
tion can be obtained from the responsible waste disposal facility.
Disposing of packaging
The packaging consists of cardboard and appropriately marked films, which can be recycled.
– Take these materials to a recycling facility.

Troubleshooting

If something isn't working...
WARNING
Risk of injury!
Improper repairs can result in the product functioning unsafely. This endangers
yourself and your environment.
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself.
Please consult the following table before contacting the dealer. You will save yourself a lot of
trouble and possibly money too.
Fault/malfunction
Motor does not
start.
Cause
Tank empty?
Excess fuel in the
combustion chamber?
Incorrect fuel?
Throttle at
?
Spark plug connector not
firmly attached?
Spark plug connector
contaminated?
Spark plug contaminated?
Electrode clearance of spark
plug incorrect?
Spark plug defective?
Air filter contaminated?
Remedy
Filling with fuel
Screw out the spark plug, dry off the
electrode and start with throttle fully open.
Drain tank and fill up with the correct fuel.
If the engine with fuel pump: Set the
throttle to position
If the engine with choke: Set the throttle to
position
.
Push the connector firmly onto the spark
plug.
Clean the spark plug connec tor.
Clean the spark plug
Adjust gap to 0.7 mm to 0.8 mm.
Replace spark plug
Cleaning/replacing the air filter
.

Advertisement

Table of Contents
loading

Table of Contents