Table of Contents
Advertisement
– Switch off the motor.
– Pull off the spark plug connector (40).
– Unscrew the spark plug (41).
–
Check the electrode for discolouration.
Standard colour: light brown
–
Check the electrode distance.
Correct distance: 0.7 mm to 0.8 mm
Cleaning the spark plug
– Remove rust from the electrode with a wire brush.
Replacing the spark plug
– Insert a cleaned or new spark plug and tighten by hand.
– Tighten hand-tightened spark plug by approx. quarter of a rotation using the spark plug
wrench. Do not tighten spark plug too tight, otherwise the threads will be damaged.
– Replace the spark plug connector (40) firmly on the spark plug.
Changing the gearbox oil
– Draining the gearbox oil
– Filling with gearbox oil
Storage and transport
WARNING
Risk of injury!
The motor must be switched off during maintenance and cleaning work and when
transporting without its own drive!
Storage
– Let the product cool before storing.
– Store the product in a dry, well-ventilated place.
Longer downtimes (3 months or longer)
Always remove fuel from the product before storing for longer periods.
– Empty the tank.
– Start the motor and let it run until the motor switches off by itself.
Transportation in a vehicle
– Allow the product to cool down.
– Empty the tank.
– Secure the product to stop it slipping and tipping over.
Disposal
Disposing of the product
Advertisement
Table of Contents
