Master Cut CJF-1001A Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Master Cut Manuals
  4. Lawn Mower
  5. CJF-1001A
  6. Operating instructions manual

Master Cut CJF-1001A Operating Instructions Manual

Sickle-bar mower
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
sickle-bar mower
OPERATING INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Master Cut CJF-1001A

  • Page 1 sickle-bar mower OPERATING INSTRUCTIONS...

  • Page 2: What Do The Symbols Mean

    Dear Customer, Congratulations on your purchase! Your new product has been developed and manufactured to state-of-the-art technology. Before using the product for the first time, please be sure to read these instructions for use! They provide you with all information necessary for using the product safely and to ensure its long serv ice life.
  • Page 3 tective equipment such as hearing protection reduces the risk of injury. • Keep children and other persons away when using the product. Distractions may cause you to lose control of the product. • All parts of the product must be correctly installed to ensure faultless operation. •...
  • Page 4 CAUTION Product damage! The product is supplied without gearbox oil. Make sure it is filled with gearbox oil before using for the first time. Operating the gearbox with insufficient oil will damage the gearbox. Contaminated gearbox oil will reduce the service life of the gearbox. Use the specified gearbox oil.
  • Page 5 • Do not modify the motor's basic settings and do not over-rev it. • Carefully start the motor in accordance with the instructions and ensure there is an adequate distance from your feet to the tool(s). • Never place your hands or feet on or under rotating parts. •...
  • Page 6 Your product at a glance 1. Coupling handle (for cutting tool) 2. Latch 3. Steering 4. Arm housing 5. Motor oil filling screw 6. Exhaust with protective grille 7. Wheel 8. Ground sliders 9. Cutting tool 9.a Cutting tool guard 10.
  • Page 7 Assembly Mounting the wheels WARNING Risk of injury! Make sure that the linch pin closes fully. CAUTION Product damage! Pay attention to the running direction of the wheel. The profile of the wheels must point forward in travel direction. CAUTION Product damage! Always make sure that the tyres have the correct air pressure.
  • Page 8 Mounting the steering CAUTION Product damage! Pay attention to the routing of the Bowden cables. The Bowden cables may neither be routed in too small a radius not may they be crushed. – Loosen the self-locking nut (20) with the circlip and the washer from the round-head screw with square neck (21).

  • Page 9: Using For The First Time

    Mounting the cutter WARNING Risk of injury! Make sure that the cutting tool guard (9a) is installed on the cutter (9). – Loosen the self-locking nut (23) with the circlip and the washer from the screw (24) with the washer. –...
  • Page 10 Adjust the sliding block WARNING Risk of injury! Make sure that the cutting tool guard (9a) is installed on the cutter (9). CAUTION Product damage! The sliding block (26) must always be correctly adjusted. An incorrect adjustment can result in the cutter jumping out of the guide (27) or damage being caused to the cutting tool (9).
  • Page 11 Throttle • Throttle in (14) position = Motor off • Throttle in (14) position = minimum motor speed • Throttle in (14) position = maximum motor speed • Throttle in (14) position = Choke Note: if the engine is with fuel pump, it is without choke. Coupling handle for wheel drive When the coupling handle is released (15), the cable pull must be completely relieved.
  • Page 12 Filling with fuel DANGER Risk of injury! Petrol is highly inflammable! – Before refuelling, switch off the motor and let it cool down. – Closely observe all safety information for handling fuel. Note: Use only appropriate fuel. – Switch off the motor. –...

  • Page 13: Operation

    Filling with gearbox oil CAUTION Product damage! The product is supplied without gearbox oil. Make sure it is filled with gearbox oil before using for the first time. Operating the gearbox with insufficient oil will damage the gearbox. Contaminated gearbox oil will reduce the service life of the gearbox. Use the specified gearbox oil.
  • Page 14 Check the safe condition of the product: – Check whether there is any leakage. – Check whether there are any visible defects. – Check whether all parts of the product are firmly attached. – Check that the safety devices are in faultless condition. Starting the motor DANGER Danger of fire!

  • Page 15: Cleaning And Maintenance

    WARNING Risk of injury! If there is a risk of slipping on slopes, the product is to be held by a second person using a bar or a rope. The second person must stand above the product and maintain an adequate distance from the cutting tool. Always work across slopes, never upwards or downwards.
  • Page 16 After each use What? How? Clean the product. Cleaning the product Lubricate cutting tool with little Lubricate the cutting tool. lubricating grease. After the first five operating hours What? How? Change the motor oil. Draining the motor oil. Every 25 operating hours or every 3 months What? How? Replace the air filter.
  • Page 17 Checking the motor oil level CAUTION Product damage! The product is supplied without motor oil. Make sure it is filled with motor oil before using for the first time. The oil level must be checked and topped up refilled each time before using the motor.
  • Page 18 Draining the gearbox oil – Switch off the motor. – Disconnect the spark plug. – Hold a collecting container below the gearbox oil drain plug (37). – Unscrew and remove the gearbox oil filling plug (36) and gearbox oil drain plug (37) using a suitable tool.

  • Page 19: Storage And Transport

    – Switch off the motor. – Pull off the spark plug connector (40). – Unscrew the spark plug (41). – Check the electrode for discolouration. Standard colour: light brown – Check the electrode distance. Correct distance: 0.7 mm to 0.8 mm Cleaning the spark plug –...

  • Page 20: Troubleshooting

    CAUTION Environmental damage, fire hazard! Avoid damage caused by leaking fuel, motor oil or gearbox oil: Remove all operating media before disposing of the product. Do not dispose of the product with the household waste! Proper disposal is mandatory. Informa- tion can be obtained from the responsible waste disposal facility.
  • Page 21 Fault/malfunction Cause Remedy Spark plug connector not Push the connector firmly onto the spark firmly attached? plug. Air filter contaminated? Cleaning/replacing the air filter Motor misfires Incorrect fuel? Drain tank and fill up with the correct fuel. when running. Fuel contaminated? Empty tank and fill up with fresh fuel.

Table of Contents