Table of Contents
Advertisement
order a kit of six single slot EMC Filler Panels directly from NI by visiting
ni.com/info
Caution To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution To ensure the specified EMC performance, the length of all I/O cables
must be no longer than 3 m (10 ft).
Related Information
Installing PXI EMC Filler Panels
Connecting Cables
1.
Use any shielded 50 Ω SMA cable to connect signals to the connectors on the front panel
of your device.
2.
Use the SHH19-H19-AUX cable (NI part number: 152629-01 or 152629-02) to connect
to the digital I/O (DIO) and programmable function interface (PFI) signals on the
AUX I/O connector. NI recommends using the SCB-19 connector block to access the
DIO and PFI signals.
How to Use Your NI FlexRIO
Documentation Set
Refer to Figure 2 and Table 1 to learn how to use your FlexRIO documentation set.
and entering
partnumber
on page 33
NI 5772R User Manual and Specifications | © National Instruments | 3
.
Advertisement
Table of Contents
