Electromagnetic Compatibility Guidelines; Flexrio Documentation - National Instruments NI-5783 Getting Started Manual

Four channel transceiver adapter module
Table of Contents

Advertisement

Worldwide Support and Services............................................................................................ 12
Where to Go Next................................................................................................................... 12

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
shielded cables and accessories.
Caution
must be no longer than 3 m (10 ft).

FlexRIO Documentation

Table 1. FlexRIO Documentation Locations and Descriptions
Document
Getting started guide
for your FlexRIO
FPGA module or
Controller for
FlexRIO
Specifications
document for your
FlexRIO FPGA
module or Controller
for FlexRIO
Getting started guide
for your adapter
module
2 | ni.com | NI 5783 Getting Started Guide
To ensure the specified EMC performance, operate this product only with
To ensure the specified EMC performance, the length of all I/O cables
Location
Available from the Start menu
and at ni.com/manuals.
Available from the Start menu
and at ni.com/manuals.
Available from the Start menu
and at ni.com/manuals.
Description
Contains installation instructions
for your FlexRIO system.
Contains specifications for your
FlexRIO FPGA module or
Controller for FlexRIO.
Contains signal information,
examples, and CLIP details for
your adapter module.

Advertisement

Table of Contents
loading

Table of Contents