How To Adjust The Cutting Height; How To Install The Discharge Deflector; Reverse Mowing Option (Rmo) - Briggs & Stratton 7800954-00 Operator's Manual

How To Adjust The Cutting Height

1. Raise or lower the cutting height adjust lever (A, Figure
19) into the desired height of cut notch.
A
Figure 19

Reverse Mowing Option (RMO)

WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to
the presence of children. Never activate RMO if children
are present. Children are often attracted to the unit and
the mowing activity.
1. Engage the mower blade. Refer to "How To Engage The
Mower Blade".
2. Insert the supplied key (A, Figure 20) into the RMO
switch (B), and turn the key to activate the RMO
function. The LED light (C) indicates that the RMO
function is now activated.
3. Engage the transmission in reverse. Refer to "How To
Engage The Transmission".
4. The RMO function is deactivated when the mower blade
is disengaged.
A
Figure 20

How To Install The Discharge Deflector

DO NOT attempt any adjustments, maintenance, service
or repairs with the engine running.
1. Remove the nut and washer (A, Figure 21) securing the
Figure 21
C
B
WARNING
• STOP engine.
• STOP blade.
• Engage parking brake.
• Remove key.
• Remove spark plug wire from spark plug and secure
away from plug.
• Engine and components are HOT. Avoid serious
burns, allow all parts to cool before working on
machine.
bottom edge of the mulching cover (B) to the mower
deck.
A
B
en
17