Logging In To The Eap Device; Log In Via The Domain Name - TP-Link EAP110 Quick Setup Manual

Step2: Logging In to the EAP Device
There are two methods to log in to the EAP. You can choose one as you like:

Log In via the Domain Name

Note:
EAP320 and EAP330 are not currently available for login via domain name.
 Method 1: Log In via the Domain Name
In this method, you needn't know the IP address of the EAP, but you need to prepare a
wireless client device, such as a wireless laptop. Follow the steps below to log in to the
EAP wirelessly:
1. Set the wireless client device to get IP settings assigned automatically.
2. Search the default SSID (Network name) using your wireless client device and
connect to the wireless network of the EAP. The default SSID of the EAP is printed
on the product label at the bottom of the device. The dual-band EAP has two default
SSIDs named TP-LINK_2.4GHz_XXXXXX and TP-LINK_5GHz_XXXXXX on the
2.4GHz band and 5GHz band, and the single-band EAP has a default SSID named TP-
LINK_2.4GHz_XXXXXX on the 2.4GHz band.
3. Make sure that the wireless client has been assigned with the IP address and has got
the IP address of the DNS server and the gateway.
and Method 2: Log in via the IP Address of the EAP
2
Method 1:
.