TP-Link EAP110 Quick Setup Manual page 5

• If login still fails, reset the EAP device to its factory default settings and try again.
5. In the pop-up window, configure a new username and a new password for your user
account.
6. Use the new username and password to log in.
 Method 2: Log in via the IP Address of the EAP
To log in to the EAP via the IP address of the EAP, you need to prepare an Ethernet cable
to connect your computer. Follow the steps below to log in via the IP address of the EAP:
1. Get the IP address of the EAP. There are two methods.
• Log in to the router which acts as the DHCP server. In the DHCP client list, find the
IP address of your EAP according to its MAC address. The MAC address can be
found at the bottom of the EAP.
• Go to http://www.tp-link.com/en/download/EAP-Controller.html#EAP_Discovery_
Tool to download EAP Discovery Utility. EAP Discovery Utility is a software that can
scan all EAPs in the same network segment. Install and launch EAP Discovery Utility
4