TP-Link EAP110 Quick Setup Manual page 4

4. Launch a web browser on the client device and enter http://tplinkeap.net in the
address bar to load the login page of the EAP. Use admin for both of the username
and password to log in.


Tips
If you cannot log in to the EAP via the domain name, try the operations below for
troubleshooting:
• Clear the browser cache or use anther browser to log in again.
• Go to the wireless setting of your wireless client device and turn off the Wi-Fi
button. Then turn it on and connect the network again. Or you can reboot the EAP
device.
• If you know the IP address of the EAP, you can login to the EAP via the IP address.
For the detailed steps, refer to Method 2: Log in via the IP Address of the EAP
3