Omron STC-APB503PCL Product Specifications And User's Manual page 4

Precautions for safe use
Please read carefully this "Precautions for safe use" before use the camera. Then the camera uses correctly with
agreeing with below notes.
In this "Precautions for safe use", notes divides into "Warning" and "Caution" to use the camera safety and prevent to
harm and damage.
About Graphic
symbols
[Environment / condition]
Do not use flammable or explosiveness
atmospheres.
This will cause of personal injury or fire.
Use and store under specified environmental
conditions (Vibration, shock, temperature,
humidity) in the specifications for this camera.
This will cause of fire or damage the camera.
[Installation and cable wiring]
Do not use with out of power voltage range
that is specified in the specifications for this
camera.
This will cause of fire, electrification or
malfunction.
Do not grounding DC power (+) of all devices
that are connect to the camera.
The camera housing is connecting to 0 V line of
camera inside circuit.
There is a risk of short circuit between camera
inside ciurcuit and frame ground.
This will cause of malfunction.
It is necessary to wiring with turn off the camera.
This will cause of electrification or malfunction.
Do not use Camera Link un-supported cable
and board.
There is a risk of malfunction if the camera
connects with wrong environment and turn on
the camera.
STC-APB503PCL / STC-APC503PCL
Product Specifications and Use's Guide
This shows, assumption for possibility of serious accident leading death or
Warning
serious injury if ignore this note and camera uses incorrectly.
This shows, assumption for possibility of bear the damage or physical
Caution
damage if ignore this note and camera uses incorrectly.
This symbol shows general prohibition.
This symbol shows completion or instruction.
Warning
Do not use for "safety for human body" related
usage.
This camera is designed for use "do not harm
human body immediately" if by any chance the
camera has malfunction.
Caution
Warning
Do not wrong wiring.
This will cause of fire or malfunction.
Caution
It is necessary to wiring and mounting that is
specified in the specifications for this camera.
This will cause of fire or malfunction.
It is necessary to mounting the camera without
stress for the cable.
This will case of electrification or fire.
No.19S019-01
1
1