Table of Contents
Advertisement
3.3
Mechanical Specifications
Model Number
Dimensions
Optical Filter
Optical Center Accuracy
Material
Lens Mount (*2)
Interface Connectors
Camera Mounting
Weight
(*1)
Excluding connectors
3.4
Environmental Specifications
Model Number
Operational Temperature / Humidity
Storage Temperature / Humidity
Vibration
Shock
Standard Compliancy
RoHS
(*1) Please insure the camera is installed with the appropriate heat dissipation to keep the camera housing temperature
(top plate) is less than 64 deg. C when the camera using the ambient temperature is exceeded 45 deg. C.
If the camera has a mounted lens and a tripod with an aluminum plate, this could decrease the camera housing
temperature for the heat dissipation.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
Measuring point
STC-APB503PCL / STC-APC503PCL
Product Specifications and Use's Guide
STC-APB503PCL
Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Power-I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
M2 screw holes (Three on top and both side, Four on bottom plates)
M4 screws holes (Tow on top and both side, Four on bottom plates)
STC-APB503PCL
Environmental Temperature: 0 to +45 deg. C (Camera housing temperature shall not exceed +64 deg. C) (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Environmental Temperature: -20 to +65 deg. C, Environmental Humidity: 0 to 80 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each
28 (W) x 28 (H) x 40 (D) mm (*1)
No Optical Cut Filter
Aluminum alloy (AC)
C Mount
Camera Link Connector: SDR x 1
Approximately 36 g
EMS: EN61000-6-2, EMI: EN55011
RoHS Compliant
No.19S019-01
STC-APC503PCL
STC-APC503PCL
7
1
Advertisement
Table of Contents
