SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual
Figure 5-9 Select the crimping module
(A) Crimping module
for multi-core cables of
a 3-pin model
----End
Follow-up Procedure
Use scissors to cut off the joints of the rubber rings to remove them. All rubber
rings are removed in the same way.
Remove the corresponding rubber rings in strict accordance with the cable
diameter, and ensure that the crimping module is not damaged. Otherwise the
protection level of the solar inverter will be affected.
Figure 5-10 Remove the rubber ring
Issue 07 (2020-09-15)
(B) Crimping module
for single-core cables of
a 3-pin model
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(C) Crimping module
for multi-core cables
of 4-pin models
(D) Crimping module
for single-core cables
of 4-pin models
52