Huawei SUN2000-100KTL Series User Manual page 10

SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual
equipment malfunction, component damage, personal injuries, or property
damage are not covered under the warranty.
Follow local laws and regulations when installing, operating, or maintaining the
equipment. The safety instructions in this document are only supplements to local
laws and regulations.
Huawei will not be liable for any consequences of the following circumstances:
●
●
●
●
●
●
●
General Requirements
Do not work with power on during installation.
●
●
●
●
●
●
●
●
Issue 07 (2020-09-15)
Operation beyond the conditions specified in this document
Installation or use in environments which are not specified in relevant
international or national standards
Unauthorized modifications to the product or software code or removal of the
product
Failure to follow the operation instructions and safety precautions on the
product and in this document
Equipment damage due to force majeure, such as earthquakes, fire, and
storms
Damage caused during transportation by the customer
Storage conditions that do not meet the requirements specified in this
document
D ANGER
Do not install, use, or operate outdoor equipment and cables (including but
not limited to moving equipment, operating equipment and cables, inserting
connectors to or removing connectors from signal ports connected to outdoor
facilities, working at heights, and performing outdoor installation) in harsh
weather conditions such as lightning, rain, snow, and level 6 or stronger wind.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
In the case of a fire, immediately leave the building or the equipment area,
and turn on the fire alarm bell or make an emergency call. Do not enter the
building on fire in any case.
Do not scrawl, damage, or block any warning label on the equipment.
Tighten the screws using tools when installing the equipment.
Understand the components and functioning of a grid-tied PV power system
and relevant local standards.
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for a long period of time.
Do not open the host panel of the equipment.
Copyright © Huawei Technologies Co., Ltd.
1 Maintenance and Replacement
2