Opening The Maintenance Compartment Door - Huawei SUN2000-100KTL Series User Manual

SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual
Figure 5-6 Connecting the PE cable to the PE point (on the enclosure)
(1) Reserved PE point
----End
Follow-up Procedure
To enhance the corrosion resistance of a ground terminal, apply silica gel or paint
on it after connecting the PE cable.

5.4 Opening the Maintenance Compartment Door

Precautions
● Do not open the panel cover of the solar inverter.
● Before opening the maintenance compartment door, ensure that no electrical
● If you need to open the maintenance compartment door in rainy or snowy
● Do not leave unused screws in the maintenance compartment.
Procedure
Step 1 Open the maintenance compartment door and install the support bar.
Issue 07 (2020-09-15)
CA UTION
connections are made for the solar inverter on the AC or DC side.
days, take protective measures to prevent rain or snow from entering the
maintenance compartment. If unavoidable, do not open the maintenance
compartment door.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
50