Huawei SUN2000-100KTL Series User Manual page 71

SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual
1.
2.
3.
Issue 07 (2020-09-15)
A maximum of one set of Y-branch connectors can be used for each MPPT.
The PV+ on the solar inverter side must be connected to the PV+ on the PV
string side, and the PV– on the solar inverter side must be connected to the
PV– on the PV string side.
Preferentially and evenly connect the Y-branch connectors to the MPPTs
controlled by DC SWITCH 2 or DC SWITCH 3.
Number Recommended MPPT
of Y- to Be Connected
branch
Connecto
r Sets
1 MPPT9
3 MPPT5, MPPT7 and
MPPT9
5 MPPT5, MPPT7, MPPT8,
MPPT9, and MPPT10
7 MPPT1, MPPT5, MPPT6,
MPPT7, MPPT8, MPPT9,
and MPPT10
9 MPPT1, MPPT2, MPPT3,
MPPT5, MPPT6, MPPT7,
MPPT8, MPPT9, and
MPPT10
Figure 5-21 Connecting Y-branch connectors to the PV strings
(recommended)
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Number Recommended MPPT
of Y- to Be Connected
branch
Connecto
r Sets
2 MPPT7 and MPPT9
4 MPPT5, MPPT7, MPPT9,
and MPPT10
6 MPPT5, MPPT6, MPPT7,
MPPT8, MPPT9, and
MPPT10
8 MPPT1, MPPT3, MPPT5,
MPPT6, MPPT7, MPPT8,
MPPT9, and MPPT10
10 MPPT1, MPPT2, MPPT3,
MPPT4, MPPT5, MPPT6,
MPPT7, MPPT8, MPPT9,
and MPPT10
63