Remote Control - Miele G 7960 Operating Instructions Manual

Reset network configuration?
This menu option will only be displayed
if you have connected your dishwasher
to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
 Select the menu option
configuration? .
 Select the Yes menu option and con-
firm with OK.
Reset network

Remote control

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Settings" chapter, "Miele@home"
section)
If you wish to permanently switch off
the
Remote control
this under this menu option. The
 sensor control will then no longer be
available to select until you change this
setting again.
Even if the Remote control
switched off, you can use Miele@mobile
to call up information about your appli-
ance. However, you cannot start any
programmes or change any settings
from it.
Settings
option, you can do
option is
41