Miele G 7960 Operating Instructions Manual page 13


If the connection cable is damaged it must be replaced with a
special cable of the same type (available from Miele). For safety reas-
ons this work must be carried out by a Miele authorised service
technician only.

This dishwasher is supplied with a special lamp (depending on the
model) to cope with particular conditions (e.g. in terms of temperat-
ure, moisture, chemical resistance, abrasion resistance and vibra-
tion). This lamp must only be used for the purpose for which it is in-
tended. The lamp is not suitable for room lighting. Replacement
lamps may only be fitted by a Miele authorised technician or by the
Miele Customer Service Department.
This dishwasher contains several light sources with energy efficiency
rating G.
Correct installation

The dishwasher must be installed and connected in compliance
with the supplied installation sheet.

Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury/being cut. Wear pro-
tective gloves.

The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.

In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous worktop that is secured to
adjacent cabinetry.

The dishwasher must only be built into a tall unit if additional
safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the Tall unit installation set and observe the
installation sheet provided. Otherwise there is the danger of the unit
tipping over.
Warning and safety instructions
13