Miele G 7960 Operating Instructions Manual page 21

Display functions
The display is used to select or set the
following:
- The programme
- Options
- The timer
- The Settings
The display can show the following:
- The programme name
- The programme stage
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls dur-
ing this time.
Touch the  sensor control to switch
the dishwasher back on.
Guide to the appliance
The sensor controls on the control
panel and in the display react to finger-
tip contact.
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your fin-
gers.
Touch the required menu option to se-
lect it.
The currently selected setting is marked
in orange and can be changed.
The OK sensor control in the display is
used to confirm a message or setting
and to move to another menu level.
To exit a sub-menu again, use the
 Back sensor control.
Touch the  sensor control at any time
to return to the Programme menu.
If you do not press any sensor controls
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.
21