Miele G 7960 Operating Instructions Manual page 107

Hide thumbs Also See for G 7960:
Table of Contents

Advertisement

Problem
The optical in-operation
indicator light is flash-
ing quickly.
At the end of the pro-
gramme, the alarm tone
sounds and the display
shows the following
message:
 
Fault F 601: A fault has
occurred; switch the appli-
ance off and back on again.
Restart the programme. If
the fault occurs again, call
Miele Service
.
The optical in-operation
indicator light is flash-
ing quickly.
At the end of the pro-
gramme, the alarm tone
sounds and the display
shows the following
message:
AutoDos requires mainten-
ance. Please check Auto-
Dos system.
The dishwasher does
not switch off at the end
of the programme.
The wash items may not
be clean because an in-
sufficient amount of de-
tergent was dispensed.
The AutoDos function is
automatically deactiv-
ated during the pro-
gramme sequence.
Cause and remedy
There is a fault in the AutoDos.
 Switch the dishwasher off and back on again.
 Check whether the PowerDisk holder and the
PowerDisk have been fitted correctly (see "Deter-
gent – Automatic dispensing/AutoDos").
 Activate the AutoDos function and restart the pro-
gramme.
If the fault message appears again, there is a tech-
nical fault. You can continue to use your dishwasher
by deactivating automatic dispensing in the Extras
menu of a programme and manually dispensing the
detergent via the detergent compartment.
 If you wish to use automatic dispensing again,
contact the Miele Customer Service Department.
An empty PowerDisk has been inserted or the Auto-
Dos is blocked by residual detergent. Detergent
dosage is insufficient.
The AutoDos function was automatically deactivated.
 Switch the dishwasher off and back on again.
Multiple messages appear in the display.
 Clean the pouring channel of the AutoDos (see
"Detergent" chapter, "Cleaning the AutoDos" sec-
tion).
 Clean the lower spray arm (see "Cleaning and
care" chapter, "Cleaning the spray arms" section).
 Select OK to confirm each message.
 Activate the AutoDos function by confirming the
message 
AutoDos available
 Start the programme again.
The programme duration will be extended by up to
2.5 hours to flush out the AutoDos detergent outlet.
Problem solving guide
using OK.
107

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 7965

Table of Contents