Miele G 7960 Operating Instructions Manual page 79

Setting EcoStart
You can use the EcoStart
nefit from cheaper energy tariffs at
night. Before you can use this option,
you need to set up to three electrical
tariff time zones (see "Settings"
chapter, "EcoStart" section).
Then set the latest time by which the
selected programme has to be finished
by.
The dishwasher will then start automat-
ically in the most economical tariff zone
within the time set.
 Set the hours with the  sensor
controls.
 Touch the minute number block.
 Use the  sensor controls to enter
the minutes and confirm your entry
by touching OK.
The estimated start time for the selec-
ted programme will appear in the dis-
play for several minutes.
 Close the door.
The message Waiting for EcoStart
pear in the display.
The selected programme will start auto-
matically when the estimated start time
is reached.
function to be-
will ap-
Setting SmartStart
The SmartStart function is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
To use this function you may need fur-
ther technical accessories.
If you have activated the
function in the
SmartStart
the Timer  menu will no longer show
the EcoStart function but will instead
show SmartStart (see "Settings" chapter,
"Miele@home" section).
If your energy provider offers this ser-
vice, they will send a signal to your
dishwasher when energy costs are at
their most economical.
This signal will start the dishwasher.
You can set the time by which the se-
lected programme has to be finished
by. The dishwasher will then calculate
the latest possible start time for the pro-
gramme selected and will wait until this
start time for the signal from the energy
provider.
Options
menu,
Settings
79