Removing
the crispers
and crisper
cover
To remove
the crispers:
1. Slide crisper straight out to the stop, lift front,
then slide the rest of the way out.
2. Replace in reverse order.
To remove
the cover:
1. Push up glass insert from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace
the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back of corner into notch supports on walls
of refrigerator, then lower into place.
3. Slide back of glass insert into place, then
lower front.
Adjusting
the crisper
humidity
control
You can control the amount of humidity in the
moisture-sealed
crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HIGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
Moving
the meat drawer
and cover
To remove
the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove
the cover:
1. Tilt front of cover up, lift at back, and pull
straight out.
2. Replace in reverse order.
7