Epson WF-C878R Series User Manual page 446

Administrator Information
Items
Subaddress (SUB/SEP)
Password (SID/PWD)
Email
Email Address
Network Folder (SMB)
Save to
User Name
Password
FTP
Secure Connection
Save to
User Name
Password
Connection Mode
Port Number
Certificate Validation
Registering Destinations as a Group Using Web Config
If the destination type is set to Fax or Email, you can register the destinations as a group.
1. Access Web Config and select the Scan/Copy or Fax tab > Contacts.
2. Select the number that you want to register, and then click Edit.
>
Settings to Use the Printer
Set the sub address that is appended when fax is sent. Enter within 20 characters
or less using 0-9, *, # or spaces. If you do not specify this, leave it blank.
Set the password for the sub address. Enter within 20 characters or less using 0-9,
*, # or spaces. If you do not specify this, leave it blank.
Enter between 1 and 255 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ? ^ _ { | }
~ @.
\\"Folder path"
Enter the location where the target folder is located between 1 and 253 characters
in Unicode (UTF-8), omitting "\\".
Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter a password to access a network folder in 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Select FTP or FTPS according to the file transfer protocol the FTP server supports.
Select FTPS to allow the printer to communicate with security measures.
Enter the server name between 1 and 253 characters in ASCII (0x20-0x7E),
omitting "ftp://" or "ftps://".
Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Enter a password to access to an FTP server within 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not
specify this, leave it blank.
Select the connection mode from the menu. If a firewall is set between the printer
and the FTP server, select Passive Mode.
Enter the FTP server port number between 1 and 65535.
The FTP server's certificate is validated when this is enabled. This is available when
FTPS is selected for Secure Connection.
To set up, you need to import the CA Certificate to the printer.
446
>
Making Contacts Available
Settings and Explanation