Danfoss VLT MCB 113 Operating Manual page 42

Operating Guide | VLT® Extended Relay Card MCB 113
Option
[153] ATEX ETR cur. warning
[154] ATEX ETR freq. warning
[188] AHF capacitor connect
[189] External fan control
[190] Safe function active
[191] Safe opt. reset req.
[192] RS Flipflop 0
[193] RS Flipflop 1
[194] RS Flipflop 2
[195] RS Flipflop 3
[196] RS Flipflop 4
[197] RS Flipflop 5
[198] RS Flipflop 6
[199] RS Flipflop 7
Table 30: Parameter 5-41 On Delay, Relay
Range
0.01 s* [0.01 600.00 s]
Table 31: Parameter 5-42 Off Delay, Relay
Range Function
Array [9]
42 | Danfoss A/S © 2020.01
Function
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If alarm 163, ATEX ETR cur.lim.warning is active, the output is 1.
Selectable if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced ETR.
If alarm 165, ATEX ETR freq.lim.warning is active, the output is 1.
The internal logics for the internal fan control are transferred to this output to make it possible to
control an external fan (relevant for high-power duct cooling).
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Function
Array [9]
Enter the delay of the relay cut-in time. See
Selected
event
Relay
output
On delay
P 5-41
Selected
event
Relay
output
On delay
P 5-41
table 27.
Off delay
P 5-42
AQ322553864968en-000101 / 130R0353
Parameter Setup