Keysight Technologies N5261A User's And Service Manual page 44

Installation & System Operation
4. Select a Millimeter-wave module and place it on the work surface in front
5. Connect the bundle of cables to the module in the following order.
Millimeter Head Connections
Table 1-14
Order
1
2
3
4
5
Figure 1-26 Test Head Module Connections
6. Repeat
7. Apply Velcro assemblies to the ends of the cable sleeves.
8. Position each test head in the approximate location where it will be used
9. Torque all RF connections to 8 in-lb.
38
of the test set.
Module (OML)
+12 V
R.F In
L.O. In
Ref I.F.
Test I.F.
and
step 4 step 5
a. Complete steps 6, 7 and 8 of the Installation Guide from the
Millimeter-wave Cable Dress Kit (document number N5260-90070
contained in kit part number N5261-60019 and N5261-90020).
for measurement operations.
for the remaining modules.
Keysight N5261/62A User's & Service Guide