Keysight Technologies N5261A User's And Service Manual page 33

Installation & System Operation
6. Place the analyzer on top of the test set and ensure that the front frame of
Figure 1-13 Locking the Analyzer
Lock Link
7. Secure the analyzer's lower locking feet to the test set's upper locking feet
Keysight N5261/62A User's & Service Guide
the analyzer is positioned slightly forward of the locks that are attached to
the test set. Slide the analyzer back so the locks engage the front frame of
the analyzer.
Network Analyzer
Front Frame
Test Set
Front Frame
using the spring–loaded screws on the locking feet. Refer to
on page 28. If the locking feet are not aligned with the screw holes in the
test set's upper locking feet, loosen the screws securing the feet to the
instrument slightly to align and tighten.
Slide the network analyzer
Slide the network Analyzer
back to engage the lock link in
screw
back to engage the lock link
the back of the network
n the back of the netwo
analyzer's front frame
Figure 1-14
27