AEG MTH 350 Operation And Installation page 35

» Use the appliance back panel as a drilling template.
» Secure the appliance back panel to the wall with suit-
able rawl plugs and screws.


» Route the power cable through the cable entry in the
back panel.
» Hook in the appliance cover with the heater at the
bottom.
» Click the heater into place using the snap fastener.
» Secure the appliance cover with the cover fixing
screws.
Tap installation
Material losses
!
When making the connections, counter the torque
on the appliance using a size 14 spanner.
» Install the tap. For this, also observe the tap operat-
ing and installation instructions.
Installation

35