Metra Electronics 99-8201 Installation Instructions

5
Align the holes in the Mounting Brackets with the holes in the ISO-DIN head unit and mount
the Brackets to the head unit with the screws included with the unit.
6
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
3
7
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with (4) screws
previously removed in step #1.
rev. 201202
KIT FEATURES
ISO-DIN
99-8201
head unit
provisions
INSTALLATION
Pocket
provisions
INSTRUCTIONS
KIT COMPONENTS
Radio
Housing
APPLICATIONS
"C"
CAR
TOYOTA
Celica 2000-02.........................................................1-3
Echo 2000-02...........................................................1-3
Pocket
Radio
Housing
"E"
Mounting
Brackets
(6) #6 x ¼"
Phillips Flat-
TOOLS REQUIRED
Phillips screwdriver
Cutting tool
1-800-221-0932
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
Socket wrench
PAGE
www.metraonline.com