Structure And Design - Siemens OpenAir GMA 1 Series Technical Basics

Actuators with spring return
Hide thumbs Also See for OpenAir GMA 1 Series:
Table of Contents

Advertisement

Description
Housing
Gear train
Spring preload
Manual adjustment
Self-centering shaft
adapter
Mounting bracket
Electrical connection
Type-specific elements
Auxiliary switch
Potentiometer for offset
and span
Feedback potentiometer to
position indication
Push button and LED
at external Interface
10/44
Siemens
Building Technologies
2.5

Structure and design

The GMA...1 electronic actuators are available for two-position, three-position,
modulating and networked control with spring return. The nominal torque is 7 Nm. The
actuator's connection cables are prewired.
Robust, light-weight full metal housing from aluminum diecast. The housing guarantees
a long actuator life even under harsh environmental conditions.
Maintenance-free and noise-free gear train with stall and overload protection for the life
of the actuator.
The spring preload of 5° ensures safe closure of the air dampers following correct
mounting.
You can manually adjust the actuator using a hex wrench and lock it using a
screwdriver.
This mounting type allows for fastening the actuator to shafts with various diameters
and in various shapes (square, round) using just one screw.
Insert the shaft adapter from either side into the opening for the shaft adapter.
For short shafts, the shaft adapter is on the duct side.
The shaft adapter coupling and the adapter holding are coupled by means of double-
sided gearing.
A bolted metal strip is used for attaching the actuator.
All actuators have pre-wired, 0.9 m long (standard length) connection cables.
The actuators can be delivered as a type-specific variant having the following elements:
For supplementary functions, the auxiliary switches A and B can be adjusted on either
side.
Both potentiometers for the operating functions Uo and
side.
The potentiometer is integrated and can be connected by means of a cable.
The HMI of networked types consists of a push button and an LED to allow certain
interactions with the actuator or to provide visible feedback from the actuator.
GMA..1 actuators with spring return
Χ
U are accessible on either
CM2Z4614en
2018-01-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents