Installation; Location; High Frequency Interference - ESAB EMP 285ic 1ph Instruction Manual

4 INSTALLATION

4 INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment, this product
may cause radio interference. It is the user's responsibility to take adequate
precautions.
4.1

Location

Position the power source so that its cooling air inlets and outlets are not obstructed.
4.2

High frequency interference

WARNING!
The high frequency section of this machine has an output like a radio transmitter.
The power source should NOT be used near blasting operations due to the danger
of premature firing.
WARNING!
Operation close to computer installations may cause computer malfunction.
WARNING!
HIGH FREQUENCY FIELDS CAN BE DANGEROUS TO HEALTH. Extra
precautions may be required when this welding power source is used in a domestic
situation. Welders with medical pacemakers should consult their doctor before
welding. EMF may interfere with some pacemakers.
0463 618 001
A. 6 in (152 mm)
B. 4 in (100 mm)
C. 6 in (152 mm)
If permanent installation leave enough room
to open door and access bobbin side.
- 18 - © ESAB AB 2019