Removing/Installing Wire - ESAB EMP 285ic 1ph Instruction Manual

5 OPERATION
A. Bobbin locking nut
Tightening the bobbin locking nut for 200 mm (8 in.), 300 mm (12 in.):
A. Bobbin locking nut
NOTE!
The larger bobbin may come in the wire form shown in the illustration or may be
molded plastic form. Either mounts the same way as shown.
5.8

Removing/installing wire

NOTE!
If installing aluminum wire, see "Welding with aluminum wire" section.
The EMP 285ic will handle bobbin sizes of 100 mm (4 in.), 200 mm (8 in.) and 300 mm (12
in.). See "TECHNICAL DATA" chapter for suitable wire dimensions for each wire type.
0463 618 001 - 34 - © ESAB AB 2019