Cleaning According To Surface Material; Decorative Laminate Hpl - Wesemann SYSTEM DELTA 30 User Manual

Suspend air baffl e, Pos. 46 on the back panel.
Mount air baffl e using cheese head screw and Allen key SW 5. Mount air baffl e using cheese head screw and Allen key SW 5.
6. Assemble top air baffl e:
Position top air baffl e Pos. 47 on air defl ecting panel Pos. 46. Position top air baffl e Pos. 47 on air defl ecting panel Pos. 46. Position top air baffl e Pos. 47 on air defl ecting panel Pos. 46. Position top air baffl e Pos. 47 on air defl ecting panel Pos. 46.
Swivel the air baffl e upwards and secure by means of the two rotary knobs. Swivel the air baffl e upwards and secure by means of the two rotary knobs. Swivel the air baffl e upwards and secure by means of the two rotary knobs.
7.2 Cleaning according to surface materials
Spilled substances, residues and stains must be removed immediately with a suitable cleaning cloth and
cleaner. Follow the instructions of the manufacturer when using cleaning agents.
When using substances such as white spirit as a cleaner, adequate ventilation is to be ensured.
The instructions in the laboratory operating instructions must be strictly observed.
Wesemann GmbH generally recommends that, when cleaning, the cleaning agent and the cleaning cloth are
fi rst tested in an inconspicuous place.
7.2.1

Decorative Laminate HPL

When cleaning HPL laminate surfaces, cleaning agents which contain organic solvents can be used. Cleaning
with abrasive cleaners damages the surfaces and these may, therefore, not be used.
Cleaning the surface of HPL Cleaning the surface of HPL
The surface should be cleaned and then dried using kitchen paper or a soft cloth.
User Manual | Laboratory Fume Cupboard | Cleaning of Laboratory Fume Cupboards
47
46
47
77