Section 6 - G210 Invicell Plus With Signiphy Ph Monitoring System - K-Systems G210 InviCell User Manual

G210 InviCell Plus
Section 6 - G210 InviCell Plus with SignipHy
pH Monitoring System
G210 InviCell Plus with SignipHy pH Monitoring System supports external and independent monitoring
of parameters regarding the performance of culture media, CO
measurement.
All external sensors are completely independent of the functions and controls in the G210 InviCell
Plus with SignipHy pH monitoring as they are connected to and powered by instruments independent
of the G210 InviCell Plus with SignipHy pH Monitoring System.
CAUTION: Installations of external sensors must be performed by CooperSurgical or
by persons authorized by CooperSurgical only.
1
6
1 Connection for external CO
2 Connection for external pH monitoring (SignipHy™)
3 Data connection for external thermometer and power
4 Power connection for external thermometer and power
External Sensors, pH / CO
The following external sensors can be used with the G210 InviCell Plus:
•
External pH:
•
External CO
The CO sensor needs to be purchased separately, directly from MTG GMbH or Vaisala Oyj.
2
An external CO
Connectors can to be ordered separately.
• OCTAX Log & Guard™ CO
• GMP251 Carbon Dioxide Probe from Vaisala Oyj
20
SignipHy™ TrakStation®
: OCTAX Log & Guard™ CO
2
GMP251 Carbon Dioxide Probe from Vaisala Oyj
connector for the GMP251 Carbon Dioxide Probe from Vaisala Oyj is enclosed.
2
sensor from MTG
2
2
3 4
Component
sensor
2
2
sensor from MTG
2
™
concentration, temperature and pH
2
G210 InviCell Plus - back view