Section 3 - Installation; Before Installation; Placement - K-Systems G210 InviCell User Manual

Section 3 - Installation

Installation of the G210 InviCell should be carried out by a CooperSurgical Service Technician or other
authorized personnel. Incorrect installation could result in overall poor performance.
The G210 InviCell is designed as a stationary unit and, therefore, not to be moved once it has been
installed. If the incubator needs to be relocated, please contact Customer Service.

Before Installation

This incubator is transported in a crate and inspection after delivery is recommended. If the ShockWatch
or TipNTell has been triggered, inform Customer Service.
Check the contents to ensure all parts listed on the packing list are present.
www.shockwatch.com 1.800.527.9497
WARNING
HANDLE WITH CARE
RED INDICATES ROUGH HANDLING.
IF RED, NOTE ON THE BILL OF LADING
AND INSPECT PRODUCT

Placement

The G210 InviCell should be placed on a level, secure surface, away from heaters, coolers,
air-conditioning outlets, mists, splash and direct sunlight. Allow 10cm of clearance on all sides to allow
adequate ventilation.
Allow the G210 to acclimatize for two hours before installation.
To maintain a device setpoint between 35-40°C the preferred ambient temperature should be
between 20-30°C. DO NOT use the incubator at ambient temperatures exceeding 30°C as this may
compromise the incubation process.
This unit is designed for use at altitudes under 2,000 meters.
•
Installation of the unit should only be performed by an authorized CooperSurgical Service
Technician.
• Never block any of the ventilation holes on the unit.
• Make sure that all devices emitting electromagnetic radiation are kept at a reasonable distance
from the unit in order to avoid any potential interferences.
• Make sure the power circuits used are intended for medical equipment.
• Make sure there is sufficient access to the device for ease of disconnection if required.
MADE IN THE USA
L-65 (25g)
MODEL:
CAUTION
Installation
TELL
BLUE BEADS IN
ARROW INDICATES
CONTAINER WAS
TIPPED OR
MISHANDLED
3
13